{"product_id":"chimera7-pro-analog-6s-long-range-bnf-quadcopter","title":"Chimera7 Pro Analog 6S Long Range BNF Quadcopter","description":"\u003cdiv class=\"siteorigin-widget-tinymce textwidget\"\u003e\n \u003ch2\u003e\n  Features\n \u003c\/h2\u003e\n \u003cul\u003e\n  \u003cli\u003e\n   Battery voltage LED status light (illuminated IF logo on the bottom)\n  \u003c\/li\u003e\n  \u003cli\u003e\n   GoPro TPU bottom stand (GoPro protector not included)\n  \u003c\/li\u003e\n  \u003cli\u003e\n   Lightweight Side Panels Design - Keep Your Rig Clean\n  \u003c\/li\u003e\n  \u003cli\u003e\n   XING2 2809 1250KV efficient wide stator motors\n  \u003c\/li\u003e\n  \u003cli\u003e\n   GPS pre-installed for more safety at a distance\n  \u003c\/li\u003e\n  \u003cli\u003e\n   360° TPU protection, FPV cam protection\n  \u003c\/li\u003e\n  \u003cli\u003e\n   6mm rigid arm design for more stiffness\n  \u003c\/li\u003e\n  \u003cli\u003e\n   Top- and bottom battery mount option\n  \u003c\/li\u003e\n \u003c\/ul\u003e\n \u003cp\u003e\n  \u003cstrong\u003e\n   Li-Ion battery use\n  \u003c\/strong\u003e\n  : Be aware that Li-Ion battery packs do not have the same power output than Li-Po batteries. Please consider installing 2x 4000mAh batteries in parallel if you want to fly far, fast and safe. This can greatly reduce the stress per cell and hold a safe Voltage until the end of the flight. The 1x 21700 4000mh battery configuration is meant for more confined and less windy conditions!\n \u003c\/p\u003e\n \u003cp\u003e\n  \u003cstrong\u003e\n   Li-Po battery use:\n  \u003c\/strong\u003e\n  Li-Po batteries have a higher C-rating, more output power (amperage) and hold a more stable cell voltage throughout the flight. If you're beginner or don't want to mess around with Li-Ion batteries and their Pros and Cons, please consider flying Li-Po batteries first. Big batteries can be top mounted, even bigger or longer batteries can be strapped to the bottom of the frame.\n \u003c\/p\u003e\n \u003cp\u003e\n  GPS functionality to find your way back and Betaflight GPS Rescue mode ready to setup (default OFF to prevent unexpected behavior; Setup instructions included). Vertical and horizontal TBS Crossfire antenna mounts are included to cover you and your antenna dead-ends just in case. GoPro universal TPU bottom stand included; fits your original GoPro bracket and our TPU GoPro protectors (sold separately).\n \u003c\/p\u003e\n \u003ch2\u003e\n  Changes between Chimera7 and Chimera7 Pro\n \u003c\/h2\u003e\n \u003cul\u003e\n  \u003cli\u003e\n   SucceX-D F7 V2.2 Stack (F7+50A ESC) upgraded to BLITZ F722 Stack (F7 V1.1 + 55A 4in1 ESC)\n  \u003c\/li\u003e\n  \u003cli\u003e\n   New Lightweight Side Panels Design - Keep Your Rig Clean\n  \u003c\/li\u003e\n  \u003cli\u003e\n   XING 2806.5 upgraded to XING2 2809 1250KV\n  \u003c\/li\u003e\n  \u003cli\u003e\n   7-inch frame upgraded to 7.5inch\n  \u003c\/li\u003e\n \u003c\/ul\u003e\n \u003ch2 style=\"font-weight: 400;\"\u003e\n  PRE-TUNED \u0026amp; PRE-SETUP:\n \u003c\/h2\u003e\n \u003cul\u003e\n  \u003cli style=\"font-weight: 400;\"\u003e\n   \u003cb\u003e\n    \u003cspan style=\"font-weight: 400;\"\u003e\n     Is this your first BNF or are you just starting through with FPV? This article might probably help:\n    \u003c\/span\u003e\n    \u003ca href=\"https:\/\/iflightrc.freshdesk.com\/a\/solutions\/articles\/48001149209\" style=\"font-weight: 400;\"\u003e\n     \u003cstrong\u003e\n      \u003cu\u003e\n       General Guide \/\/ iFlight BNF\n      \u003c\/u\u003e\n     \u003c\/strong\u003e\n    \u003c\/a\u003e\n    \u003cbr\u003e\n   \u003c\/b\u003e\n  \u003c\/li\u003e\n  \u003cli style=\"font-weight: 400;\"\u003e\n   Don't worry about tuning, we did that for you already! A basic PID- and Filter tuning was applied for a great flight experience!\n  \u003c\/li\u003e\n  \u003cli style=\"font-weight: 400;\"\u003e\n   To restore lost tunes or updates, please check our linked article on\n   \u003ca href=\"https:\/\/iflightrc.freshdesk.com\/support\/solutions\/articles\/48001148115-firmware-wiring-factory-dumps\"\u003e\n    \u003cu\u003e\n     \u003cb\u003e\n      \u003cstrong\u003e\n       \"Firmware\/Factory Dumps\"\n      \u003c\/strong\u003e\n     \u003c\/b\u003e\n    \u003c\/u\u003e\n   \u003c\/a\u003e\n  \u003c\/li\u003e\n  \u003cli style=\"font-weight: 400;\"\u003e\n   Angle-Mode (self-balancing level mode) is enabled by default to make sure your first flight doesn't end in a mess!\n  \u003c\/li\u003e\n  \u003cli style=\"font-weight: 400;\"\u003e\n   Please check our linked article on\n   \u003ca href=\"https:\/\/iflightrc.freshdesk.com\/a\/solutions\/articles\/48001158403\"\u003e\n    \u003cu\u003e\n     \u003cb\u003e\n      \u003cstrong\u003e\n       \"How to disable Angle-Mode, activate Acro-Mode\"\n      \u003c\/strong\u003e\n     \u003c\/b\u003e\n    \u003c\/u\u003e\n   \u003c\/a\u003e\n  \u003c\/li\u003e\n  \u003cli style=\"font-weight: 400;\"\u003e\n   GPS Rescue is OFF by default to prevent unwanted or unexpected drone behavior.\n  \u003c\/li\u003e\n  \u003cli style=\"font-weight: 400;\"\u003e\n   Please check our linked article on\n   \u003cb\u003e\n    \u003cstrong\u003e\n     \u003cu\u003e\n      \u003ca href=\"https:\/\/iflightrc.freshdesk.com\/a\/solutions\/articles\/48001158402\"\u003e\n       \"GPS Rescue Mode \/\/ Setup\"\n      \u003c\/a\u003e\n     \u003c\/u\u003e\n    \u003c\/strong\u003e\n   \u003c\/b\u003e\n  \u003c\/li\u003e\n \u003c\/ul\u003e\n \u003ch2 style=\"font-weight: 400;\"\u003e\n  Specifications\n \u003c\/h2\u003e\n \u003cp style=\"font-weight: 400;\"\u003e\n  - Weight: 695g (without battery and GoPro mount)\n \u003c\/p\u003e\n \u003cp style=\"font-weight: 400;\"\u003e\n  - Total Dimensions: 258*200mm (body dimension)\n \u003c\/p\u003e\n \u003cp style=\"font-weight: 400;\"\u003e\n  - Upper(middle) Plate Thickness: 3mm\n \u003c\/p\u003e\n \u003cp style=\"font-weight: 400;\"\u003e\n  - Bottom to Top Distance: 20-29mm\n \u003c\/p\u003e\n \u003cp style=\"font-weight: 400;\"\u003e\n  - ESC: BLITZ E55 4-IN-1 2-6S ESC\n \u003c\/p\u003e\n \u003cp style=\"font-weight: 400;\"\u003e\n  - Bottom Plate Thickness: 3mm\n \u003c\/p\u003e\n \u003cp style=\"font-weight: 400;\"\u003e\n  - Camera Plate Thickness: 3mm\n \u003c\/p\u003e\n \u003cp style=\"font-weight: 400;\"\u003e\n  - Top Plate Thickness: 3mm\n \u003c\/p\u003e\n \u003cp style=\"font-weight: 400;\"\u003e\n  - Geometry:  DC (DeadCat)\n \u003c\/p\u003e\n \u003cp style=\"font-weight: 400;\"\u003e\n  - HQ 7.5X3.7X3 Propellers\n \u003c\/p\u003e\n \u003cp style=\"font-weight: 400;\"\u003e\n  - Arm Thickness: 6mm\n \u003c\/p\u003e\n \u003cp style=\"font-weight: 400;\"\u003e\n  - XING2 2809 1250KV\n \u003c\/p\u003e\n \u003cp style=\"font-weight: 400;\"\u003e\n  - FC: BLITZ F722\n \u003c\/p\u003e\n \u003cp style=\"font-weight: 400;\"\u003e\n  \u003cb\u003e\n   ELECTRONICS \/\/\n  \u003c\/b\u003e\n  \u003cb\u003e\n   \u003cstrong\u003e\n    BLITZ F7 Stack (F7 V1.1 + 55A 4in1 ESC)：\n   \u003c\/strong\u003e\n  \u003c\/b\u003e\n \u003c\/p\u003e\n \u003cp style=\"font-weight: 400;\"\u003e\n  \u003cb\u003e\n   \u003cstrong\u003e\n    FC \/\/ BLITZ F722 Flight Controller\n   \u003c\/strong\u003e\n  \u003c\/b\u003e\n \u003c\/p\u003e\n \u003cul style=\"font-weight: 400;\"\u003e\n  \u003cli\u003e\n   Mount pattern: 30.5*30.5mm \/ 4mm PCB hole diameter\n  \u003c\/li\u003e\n  \u003cli\u003e\n   Smartaudio \/ IRC Tramp VTX protocol supported\n  \u003c\/li\u003e\n  \u003cli\u003e\n   Firmware target: IFLIGHT_BLITZ_F722\n  \u003c\/li\u003e\n  \u003cli\u003e\n   Motor outputs: 4x (SH1.0 connector)\n  \u003c\/li\u003e\n  \u003cli\u003e\n   Flash: 32MB (Blackbox flash)\n  \u003c\/li\u003e\n  \u003cli\u003e\n   I2C serial: SDA \/ SLA pads\n  \u003c\/li\u003e\n  \u003cli\u003e\n   Dimensions: 36.5*35 mm\n  \u003c\/li\u003e\n  \u003cli\u003e\n   Barometer: DPS310\n  \u003c\/li\u003e\n  \u003cli\u003e\n   OSD Chip: AT7456E\n  \u003c\/li\u003e\n  \u003cli\u003e\n   LED controller: Yes\n  \u003c\/li\u003e\n  \u003cli\u003e\n   MCU: STM32 F722\n  \u003c\/li\u003e\n  \u003cli\u003e\n   Beeper pad: Yes\n  \u003c\/li\u003e\n  \u003cli\u003e\n   Gyro: BMI270\n  \u003c\/li\u003e\n  \u003cli\u003e\n   Weight: 7.8g\n  \u003c\/li\u003e\n  \u003cli\u003e\n   UARTS: 6\n  \u003c\/li\u003e\n \u003c\/ul\u003e\n \u003cp style=\"font-weight: 400;\"\u003e\n  \u003cb\u003e\n   \u003cstrong\u003e\n    ESC \/\/ BLITZ E55 4-IN-1 2-6S 55A ESC\n   \u003c\/strong\u003e\n  \u003c\/b\u003e\n \u003c\/p\u003e\n \u003cul style=\"font-weight: 400;\"\u003e\n  \u003cli\u003e\n   Supports: DShot DShot150\/300\/600\/MultiShot\/ OneShot etc.\n  \u003c\/li\u003e\n  \u003cli\u003e\n   Mounting Holes: 30.5*30.5mm\/Φ4mm\n  \u003c\/li\u003e\n  \u003cli\u003e\n   Target:   IFLIGHT_BLITZ_G2\n  \u003c\/li\u003e\n  \u003cli\u003e\n   Supports 2-6S Lipo input\n  \u003c\/li\u003e\n  \u003cli\u003e\n   Current sensor: Yes\n  \u003c\/li\u003e\n  \u003cli\u003e\n   Constant: 55 Amps\n  \u003c\/li\u003e\n  \u003cli\u003e\n   Current rate: 200\n  \u003c\/li\u003e\n  \u003cli\u003e\n   Burst: 65 Amps\n  \u003c\/li\u003e\n  \u003cli\u003e\n   Weight: 15.3g\n  \u003c\/li\u003e\n  \u003cli\u003e\n   MCU： G071\n  \u003c\/li\u003e\n  \u003cli\u003e\n   BEC: No\n  \u003c\/li\u003e\n \u003c\/ul\u003e\n \u003cp style=\"font-weight: 400;\"\u003e\n  VTX\/\/\n  \u003cb\u003e\n   BLITZ 1.6W VTX Adjustable\n  \u003c\/b\u003e\n \u003c\/p\u003e\n \u003cul style=\"font-weight: 400;\"\u003e\n  \u003cli\u003e\n   Betaflight IRC Tramp Configuration:\n   \u003cu\u003e\n    Please download the attached VTX table for Betaflight!\n   \u003c\/u\u003e\n  \u003c\/li\u003e\n  \u003cli\u003e\n   IRC Tramp VTX table values: 25mW\/400mW\/800mW\/1600mW\n  \u003c\/li\u003e\n  \u003cli\u003e\n   Power levels: PIT\/25mW\/400mW\/800mW\/1600mW\n  \u003c\/li\u003e\n  \u003cli\u003e\n   All our VTX tables can also be found here:\n   \u003ca href=\"https:\/\/drive.google.com\/drive\/folders\/1s7DSDoipPftdGA4QMj7ZKBYoKfOdYkyf\"\u003e\n    \u003cu\u003e\n     LINK\n    \u003c\/u\u003e\n   \u003c\/a\u003e\n  \u003c\/li\u003e\n  \u003cli\u003e\n   Lightweight: 18.9g (excluding antenna)\n  \u003c\/li\u003e\n  \u003cli\u003e\n   Mounting pattern: 30.5x30.5mm\/Φ3\n  \u003c\/li\u003e\n  \u003cli\u003e\n   Channels: 40 (including Raceband)\n  \u003c\/li\u003e\n  \u003cli\u003e\n   VTX telemetry: IRC Tramp\n  \u003c\/li\u003e\n  \u003cli\u003e\n   Input voltage: 7V～36V\n  \u003c\/li\u003e\n  \u003cli\u003e\n   Interface: MMCX\n  \u003c\/li\u003e\n \u003c\/ul\u003e\n \u003cp\u003e\n  \u003cb\u003e\n   Chimera7 Pro Analog BNF Included Components and Parts\n  \u003c\/b\u003e\n \u003c\/p\u003e\n \u003cul\u003e\n  \u003cli\u003e\n   4 x HQ 7.5X3.7X3 CW propeller + 4 x  HQ 7.5X3.7X3 CCW (Color may vary)\n  \u003c\/li\u003e\n  \u003cli\u003e\n   1 x RaceCam R1 Mini 1200TVL 2.1mm 19*19 camera\n  \u003c\/li\u003e\n  \u003cli\u003e\n   1 x Albatross RHCP 5.8GHz SMA FPV Antenna\n  \u003c\/li\u003e\n  \u003cli\u003e\n   2 x iFlight Lipo Strap 20*250mm (Black)\n  \u003c\/li\u003e\n  \u003cli\u003e\n   1 x Pre-built and Tested Chimera7 Pro\n  \u003c\/li\u003e\n \u003c\/ul\u003e\n \u003cp style=\"font-weight: 400;\"\u003e\n  \u003cb\u003e\n   Tips:\n  \u003c\/b\u003e\n \u003c\/p\u003e\n \u003cp style=\"font-weight: 400;\"\u003e\n  VTX is set to 25mW by default! Power levels above 25mW require a HAM license or have to be approved by local authorities! Please ensure you're flying legal frequencies and use our prepared Betaflight VTX tables according to your region.\n \u003c\/p\u003e\n\u003c\/div\u003e\n","brand":"Unmanned Tech","offers":[{"title":"No RX","offer_id":54199766450440,"sku":"844-A34-E5B","price":249.0,"currency_code":"GBP","in_stock":false},{"title":"CrossFire","offer_id":54199766483208,"sku":"FDD-887-85C","price":299.0,"currency_code":"GBP","in_stock":false}],"url":"https:\/\/bidnamic.store\/products\/chimera7-pro-analog-6s-long-range-bnf-quadcopter","provider":"Bidnamic Store","version":"1.0","type":"link"}