{"product_id":"cubepilot-cube-orange-module","title":"CubePilot Cube Orange+ Module","description":"\u003cp\u003e\n Looking for a reliable and feature-rich autopilot system for your drone or other autonomous vehicle? Look no further than the Cube Orange Plus Autopilot Module! With a faster H7 SOC, upgraded triple redundant IMUs, and a compact cube form factor, the Orange+ is designed to provide the performance you need.\n\u003c\/p\u003e\n\u003cp\u003e\n But the Orange+ doesn't just stop at basic flight control - its IMUs are mechanically isolated to reduce the impact of frame vibrations, and are temperature-controlled to ensure optimal performance in any conditions. And with full compatibility with the Cubepilot carrierboard, you can easily integrate the Orange+ into your commercial system. All inputs and outputs go through a convenient 80-pin DF17 connector, allowing for a plug-in solution that's perfect for manufacturers. You can even design your own carrier board to suit your specific needs now and in the future.\n\u003c\/p\u003e\n\u003cp\u003e\n Plus, with support for both Ardupilot and PX4 software, you can trust that the Orange+ will provide reliable and feature-rich performance. Don't miss out on this game-changing autopilot module - add the Cube Orange Plus to your cart today and take your flight capabilities to new heights!\n\u003c\/p\u003e\n\u003ch2\u003e\n Cube Orange Features\n\u003c\/h2\u003e\n\u003cp\u003e\n 1. Faster H7 SOC with 1MB ram.\n \u003cbr\u003e\n 2. Upgraded triple redundant IMU sensors for extra redundancy.\n \u003cbr\u003e\n 3. Two sets of IMU are vibration-isolated mechanically, reducing the effect of frame vibration to state estimation.\n \u003cbr\u003e\n 4. IMUs are temperature-controlled by onboard heating resistors, allowing optimum working temperature of IMUs.\n \u003cbr\u003e\n 5. The entire flight management unit(FMU) and inertial management unit(IMU) are housed in a reatively small form factor (a cube).\n \u003cbr\u003e\n 6. Fully Cubepilot carrierboard compatible, all inputs and outputs go through a 80-pin DF17 connector, allowing a plug-in solution for manufacturers of commercial systems.\n \u003cbr\u003e\n 7. Manufacturers can design their own carrier boards to suit their specific needs now and in the future.\n\u003c\/p\u003e\n\u003cp\u003e\n Vibration Damped IMU board version 3 (Fitted to Cube Orange+)\n\u003c\/p\u003e\n\u003cul\u003e\n \u003cli\u003e\n  ICM20948\n \u003c\/li\u003e\n \u003cli\u003e\n  ICM42688\n \u003c\/li\u003e\n \u003cli\u003e\n  MS5611 barometer\n \u003c\/li\u003e\n \u003cli\u003e\n  All sensors connected via SPI.\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\n I\/O ports\n\u003c\/p\u003e\n\u003cul\u003e\n \u003cli\u003e\n  14 PWM servo outputs (8 from IO, 6 from FMU).\n \u003c\/li\u003e\n \u003cli\u003e\n  R\/C inputs for CPPM, Spektrum \/ DSM and S.Bus.\n \u003c\/li\u003e\n \u003cli\u003e\n  Analogue \/ PWM RSSI input.\n \u003c\/li\u003e\n \u003cli\u003e\n  S.Bus servo output.\n \u003c\/li\u003e\n \u003cli\u003e\n  5 general purpose serial ports, 2 with full flow control\n \u003c\/li\u003e\n \u003cli\u003e\n  Two I2C ports\n \u003c\/li\u003e\n \u003cli\u003e\n  One SPI port (un-buffered, for short cables only not recommended for use).\n \u003c\/li\u003e\n \u003cli\u003e\n  Two CAN Bus interface. (CAN FD for BlueH7 and Orange with CubePilot Logo)\n \u003c\/li\u003e\n \u003cli\u003e\n  3 Analogue inputs\n \u003c\/li\u003e\n \u003cli\u003e\n  High-powered piezo buzzer driver. (On expansion board)\n \u003c\/li\u003e\n \u003cli\u003e\n  High-power RGB LED. (I2C driver compatible Connected externally only)\n \u003c\/li\u003e\n \u003cli\u003e\n  Safety switch \/ LED.\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\n Included\n\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003e\n  1pc Pixhawk Cube Orange+ FMU Module (IMU V8)\n \u003c\/li\u003e\n\u003c\/ul\u003e\n","brand":"Unmanned Tech","offers":[{"title":"Default Title","offer_id":54199881367816,"sku":"HX4-06214","price":200.0,"currency_code":"GBP","in_stock":false}],"url":"https:\/\/bidnamic.store\/products\/cubepilot-cube-orange-module","provider":"Bidnamic Store","version":"1.0","type":"link"}