{"product_id":"eachine-tyro99-diy-drone-quadcopter-kit-pnp","title":"Eachine Tyro99 DIY Drone\/Quadcopter Kit (PNP)","description":"\u003cp\u003e\n Hailed as one of, if not THE best bang-for-your-buck kit out there, the Tyro99 will blow your socks off, and will have you flying sky high without the sky-high price to match!\n\u003c\/p\u003e\n\u003cp\u003e\n With this DIY quadcopter kit that is designed to be as cheap as possible while still packing the latest features you expect from a FPV quad-copter.  To start the quad includes a F4 flight controller with integrated OSD, it also packs a 32Khz IMU so you need to make sure the FC is soft mounted when building (soft mounts are included).  You get a beefy 30A 4in1 ESC to provide enough power to the 2206 motors.  We recommend you use a 1300-1800 4S 75C lipo with the tyro to give a good balance between performance and flight time.\n\u003c\/p\u003e\n\u003cp\u003e\n \u003cstrong\u003e\n  Notice: this is the DIY version that comes unassembled.  You will still need a receiver and battery before you can fly this quad.\n \u003c\/strong\u003e\n\u003c\/p\u003e\n\u003ch3\u003e\n Specifications\n\u003c\/h3\u003e\n\u003cp\u003e\n \u003cstrong\u003e\n  210mm Frame Kit\n \u003c\/strong\u003e\n\u003c\/p\u003e\n\u003cul\u003e\n \u003cli\u003e\n  Wheel base: 210mm\n \u003c\/li\u003e\n \u003cli\u003e\n  Frame arm thickness: 5mm\n \u003c\/li\u003e\n \u003cli\u003e\n  Bottom plate thickness: 2mm\n \u003c\/li\u003e\n \u003cli\u003e\n  Side plate thickness: 2mm\n \u003c\/li\u003e\n \u003cli\u003e\n  Frame kit material: 3K carbon fiber \u0026amp; 6065 aluminium\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\n \u003cstrong\u003e\n  2206 2150KV Brushless Motor\n \u003c\/strong\u003e\n\u003c\/p\u003e\n\u003cul\u003e\n \u003cli\u003e\n  Motor KV: 2150RPM\/V\n \u003c\/li\u003e\n \u003cli\u003e\n  Idle current (Io\/10V): 1.26A\n \u003c\/li\u003e\n \u003cli\u003e\n  Lipo cell: 3-5S\n \u003c\/li\u003e\n \u003cli\u003e\n  Weight: 31g\n \u003c\/li\u003e\n \u003cli\u003e\n  Max continuous current: 31A\n \u003c\/li\u003e\n \u003cli\u003e\n  Max continuous power: 496W\n \u003c\/li\u003e\n \u003cli\u003e\n  Max thrust: 1050g (4S\/5\")\n \u003c\/li\u003e\n \u003cli\u003e\n  Configu-ration: 12N\/14P\n \u003c\/li\u003e\n \u003cli\u003e\n  Motor resistance (RM): 0.0572 Ω\n \u003c\/li\u003e\n \u003cli\u003e\n  Stator diameter: 22mm\n \u003c\/li\u003e\n \u003cli\u003e\n  Stator thickness: 6mm\n \u003c\/li\u003e\n \u003cli\u003e\n  Motor diameter: 27.7mm\n \u003c\/li\u003e\n \u003cli\u003e\n  Motor body length: 19.2mm\n \u003c\/li\u003e\n \u003cli\u003e\n  Overall shaft length: 34.2mm\n \u003c\/li\u003e\n \u003cli\u003e\n  Prop adapter shaft: M5\n \u003c\/li\u003e\n \u003cli\u003e\n  Bolt holes spacing: 16mm\n \u003c\/li\u003e\n \u003cli\u003e\n  Bolt thread: M3\n \u003c\/li\u003e\n \u003cli\u003e\n  Propeller: 5-6 inch\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\n \u003cstrong\u003e\n  4 IN 1 30A BLHeli_S ESC\n \u003c\/strong\u003e\n\u003c\/p\u003e\n\u003cul\u003e\n \u003cli\u003e\n  Continuous current: 30A\n \u003c\/li\u003e\n \u003cli\u003e\n  Peak Current: 40A(10S)\n \u003c\/li\u003e\n \u003cli\u003e\n  Input voltage: 2-5S\n \u003c\/li\u003e\n \u003cli\u003e\n  BEC: 5V 2A BEC\n \u003c\/li\u003e\n \u003cli\u003e\n  Main control chip: 48Mhz EFM8BB2\n \u003c\/li\u003e\n \u003cli\u003e\n  Firmware: BLHeli_S supports Dshot600\n \u003c\/li\u003e\n \u003cli\u003e\n  MOS: 5*6\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\n \u003cstrong\u003e\n  Customised F4 Flight Controller\n \u003c\/strong\u003e\n\u003c\/p\u003e\n\u003cul\u003e\n \u003cli\u003e\n  Main control chip: STM32F405\n \u003c\/li\u003e\n \u003cli\u003e\n  Sensor: ICM20602 6-axis\n \u003c\/li\u003e\n \u003cli\u003e\n  Power supply: 5V\n \u003c\/li\u003e\n \u003cli\u003e\n  Integrated OSD\n \u003c\/li\u003e\n \u003cli\u003e\n  Onboard LC filter\n \u003c\/li\u003e\n \u003cli\u003e\n  PID cycle rate \u0026amp; gyro refresh rate up to 32Khz\n \u003c\/li\u003e\n \u003cli\u003e\n  BetaFlight racing firmware\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\n \u003cstrong\u003e\n  700TVL COMS Camera\n \u003c\/strong\u003e\n\u003c\/p\u003e\n\u003cul\u003e\n \u003cli\u003e\n  Case size: 25mm*25mm\n \u003c\/li\u003e\n \u003cli\u003e\n  Weight: 9.5g\n \u003c\/li\u003e\n \u003cli\u003e\n  Total pixels: PAL: 1020H×596V (0.61MP); NTSC: 1020H×508V (0.52MP)\n \u003c\/li\u003e\n \u003cli\u003e\n  Effective pixels: PAL: 976H×582V (0.57MP); NTSC: 976H×494V (0.48MP)\n \u003c\/li\u003e\n \u003cli\u003e\n  Signal system: PAL\/NTSC switchable\n \u003c\/li\u003e\n \u003cli\u003e\n  Resolution ratio(horizontal center): 700TVL\n \u003c\/li\u003e\n \u003cli\u003e\n  Video output: 1.0Vp-p\/75Ω\n \u003c\/li\u003e\n \u003cli\u003e\n  Automatic gain control: 0.25\/0.50\/0.75\/1.00, up to 55dB\n \u003c\/li\u003e\n \u003cli\u003e\n  White balance: on\/off optional\n \u003c\/li\u003e\n \u003cli\u003e\n  Exposure mode: electron exposure\n \u003c\/li\u003e\n \u003cli\u003e\n  Electronic shutter: 1\/50(1\/60) - 1\/100000 S\n \u003c\/li\u003e\n \u003cli\u003e\n  Gamma correction: 0.45\/1.0\n \u003c\/li\u003e\n \u003cli\u003e\n  Synchronization method: inter-sync\n \u003c\/li\u003e\n \u003cli\u003e\n  Camera lens: standard 2.8mm\n \u003c\/li\u003e\n \u003cli\u003e\n  Lens operating voltage: DC12V (wide voltage, measured can work normally at 7.5-13V)\n \u003c\/li\u003e\n \u003cli\u003e\n  Working current: 70mA (low power consumption)\n \u003c\/li\u003e\n \u003cli\u003e\n  Working temperature: -20℃~-60℃\n \u003c\/li\u003e\n \u003cli\u003e\n  Humidity: 0%~98%\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\n \u003cstrong\u003e\n  5.8G 40CH 0mW\/25mw\/200mw\/600mw switchable VTX\n \u003c\/strong\u003e\n\u003c\/p\u003e\n\u003cul\u003e\n \u003cli\u003e\n  Output power \u0026amp; transmission distance: ≥0.5km@25mW, ≥1km@200mW, ≥2km@600mW\n \u003c\/li\u003e\n \u003cli\u003e\n  Transmitting power: 0mW\/25mW\/200mW\/600mW\n \u003c\/li\u003e\n \u003cli\u003e\n  Full video format: NTSC \/PAL\n \u003c\/li\u003e\n \u003cli\u003e\n  Input voltage \u0026amp; power dissipation: 7V~24V, +12V\/260mA@600mW\n \u003c\/li\u003e\n \u003cli\u003e\n  Size: 20*30*9mm\n \u003c\/li\u003e\n \u003cli\u003e\n  Weight: ≤7g(except antenna)\n \u003c\/li\u003e\n \u003cli\u003e\n  With output power self-check function.\n \u003c\/li\u003e\n \u003cli\u003e\n  Nixie tube SCAN: frequency point (1-8), frequency band (A-E), power (1-3, 0=0mw, 1=25mw, 2=200mw, 3=600mw)\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\n \u003cstrong\u003e\n  Racerstar 5038 2 Blade Propeller\n \u003c\/strong\u003e\n\u003c\/p\u003e\n\u003cul\u003e\n \u003cli\u003e\n  Material: PC\n \u003c\/li\u003e\n \u003cli\u003e\n  Mounting hole: 5mm\n \u003c\/li\u003e\n \u003cli\u003e\n  Center thickness: 8mm\n \u003c\/li\u003e\n \u003cli\u003e\n  Quantity: 10 pairs\n \u003c\/li\u003e\n \u003cli\u003e\n  Color: blue, red, yellow, purple, white\n \u003c\/li\u003e\n \u003cli\u003e\n  Weight: 7.25G a pair\n \u003c\/li\u003e\n \u003cli\u003e\n  Delivery color randomly (10 pairs of propellers are the same color)\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\n \u003cstrong\u003e\n  Battery Not included\n \u003c\/strong\u003e\n \u003cbr\u003e\n \u003cstrong\u003e\n  Recommend 3-5S - idealy a 1500 4S 75C Lipo\n \u003c\/strong\u003e\n\u003c\/p\u003e\n\u003cp\u003e\n Kit Contents\n \u003cbr\u003e\n 1 x 210mm frame kit\n \u003cbr\u003e\n 2 x 2206 2150KV brushless motor CW\n \u003cbr\u003e\n 2 x 2206 2150KV brushless motor CCW\n \u003cbr\u003e\n 1 x 4 IN 1 30A BLHeli_S ESC\n \u003cbr\u003e\n 1 x Customized F4 flight controller\n \u003cbr\u003e\n 1 x 700TVL COMS camera\n \u003cbr\u003e\n 1 x 5.8G 40CH 0mw\/25mw\/200mw\/600mw switchable VTX\n \u003cbr\u003e\n 2 x Battery strap\n \u003cbr\u003e\n 10 x Racerstar 5038 2 blade propeller CW\n \u003cbr\u003e\n 10 x Racerstar 5038 2 blade propeller CCW\n\u003c\/p\u003e\n","brand":"Unmanned Tech","offers":[{"title":"Default Title","offer_id":54199269032200,"sku":"TYRO99","price":99.0,"currency_code":"GBP","in_stock":false}],"url":"https:\/\/bidnamic.store\/products\/eachine-tyro99-diy-drone-quadcopter-kit-pnp","provider":"Bidnamic Store","version":"1.0","type":"link"}