{"product_id":"kakute-f7-aio-v1-5-mpu6000","title":"Kakute F7 AIO (v1.5 \/ MPU6000)","description":"\u003cp\u003e\n The Holybro Kakute F7 All-In-One flight controller makes it easy to build your multirotor. It integrates flight controller (FC), power distribution board (PDB), and on-screen display (OSD) in one. The Kakute F7 AIO?s layout makes it easy to wire up the other components of the multirotor while keeping the build neat and tidy.\n\u003c\/p\u003e\n\u003ch2\u003e\n Key Features\n\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003e\n  Supports Betaflight, Butterflight, and Cleanflight.\n \u003c\/li\u003e\n \u003cli\u003e\n  Betaflight OSD. Change PIDs, adjust common configuration parameters, and change video transmitter channel and power level, all using your transmitter sticks and goggles.\n \u003c\/li\u003e\n \u003cli\u003e\n  Soft-mounting built in. The IMU (\"gyro\") chip on this board is mounted on vibration-isolating foam. This means that there is no need to soft-mount the board itself.\n \u003c\/li\u003e\n \u003cli\u003e\n  MPU6000 Gyro\n \u003c\/li\u003e\n \u003cli\u003e\n  Ready for autonomous flight: Integrated BMP280 barometer and SCL\/SDA pads for use with external GPS\/magnetometer units.\n \u003c\/li\u003e\n \u003cli\u003e\n  2 oz. copper PCB allows up to 120A maximum continuous current.\n \u003c\/li\u003e\n \u003cli\u003e\n  Dedicated bootloader button for easy firmware flashing.\n \u003c\/li\u003e\n \u003cli\u003e\n  Low-profile design fits into even very compact frames.\n \u003c\/li\u003e\n \u003cli\u003e\n  Input voltage 7v to 42v. Power the board directly from the flight pack, up to 6S (on \"B+\" pad only).\n \u003c\/li\u003e\n \u003cli\u003e\n  Automatic voltage monitoring. No need to run a separate vBat wire for voltage monitoring; the Kakute F7 AIO monitors voltage directly from the battery power lead.\n \u003c\/li\u003e\n \u003cli\u003e\n  Filtered voltage output for clean, noise-free video. On-board regulators output 5v at up to 2 amps and 3.3v at up to 200 mA to power peripherals such as receiver, video transmitter, FPV camera, or LED strip.\n \u003c\/li\u003e\n \u003cli\u003e\n  Supports BLHeli pass-through for easy ESC upgrade and configuration.\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\n Specifications\n\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003e\n  MCU: STM32F745 32-bit processor\n \u003c\/li\u003e\n \u003cli\u003e\n  IMU: ICM20689 (SPI)\n \u003c\/li\u003e\n \u003cli\u003e\n  Barometer: BMP280\n \u003c\/li\u003e\n \u003cli\u003e\n  Current Sensor: Approximately 130 amps maximum measurable value\n \u003c\/li\u003e\n \u003cli\u003e\n  USB VCP Driver (all UARTs usable simultaneously; USB does not take up a UART)\n \u003c\/li\u003e\n \u003cli\u003e\n  6 hardware UARTS (UART1,2,3,4,6,7)\n \u003c\/li\u003e\n \u003cli\u003e\n  All UARTS support hardware inversion. SBUS, SmartPort, and other inverted protocols work on any UART without \"uninvert hack\"\n \u003c\/li\u003e\n \u003cli\u003e\n  Supports serial receivers (SBUS, iBus, Spektrum, Crossfire) only. PPM and PWM receivers are not supported\n \u003c\/li\u003e\n \u003cli\u003e\n  TF card for Blackbox logging\n \u003c\/li\u003e\n \u003cli\u003e\n  Dimensions: 35x48x7mm (includes foam-mounted gyro board in height)\n \u003c\/li\u003e\n \u003cli\u003e\n  Mounting Holes: Standard 30.5mm square to center of holes\n \u003c\/li\u003e\n \u003cli\u003e\n  Weight: 11g\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\n Package Contents\n\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003e\n  KakuteF7 AIO *1\n \u003c\/li\u003e\n \u003cli\u003e\n  Foam*2\n \u003c\/li\u003e\n \u003cli\u003e\n  FFC*1\n \u003c\/li\u003e\n\u003c\/ul\u003e\n","brand":"Unmanned Tech","offers":[{"title":"Default Title","offer_id":54199572857096,"sku":"11034","price":38.0,"currency_code":"GBP","in_stock":false}],"url":"https:\/\/bidnamic.store\/products\/kakute-f7-aio-v1-5-mpu6000","provider":"Bidnamic Store","version":"1.0","type":"link"}