{"product_id":"matek-r24-td-expresslrs-elrs-2-4ghz-true-diversity-receiver","title":"Matek R24-TD ExpressLRS\/ELRS 2.4GHz True Diversity Receiver","description":"\u003cp\u003e\n Transform your RC experience with the cutting-edge Matek ExpressLRS\/ELRS 2.4GHz True Diversity Receiver, R24-TD, a high-performance receiver designed for enthusiasts demanding precision and reliability. Powered by the robust ESP32-PICO-D4 chipset and SX1281 radio, this receiver ensures a seamless, interference-free connection over the 2.4GHz ISM frequency band.\n\u003c\/p\u003e\n\u003cp\u003e\n \u003cstrong\u003e\n  Key Features:\n \u003c\/strong\u003e\n\u003c\/p\u003e\n\u003cul\u003e\n \u003cli\u003e\n  \u003cstrong\u003e\n   High Power Output:\n  \u003c\/strong\u003e\n  Features a PA\/LNA AT2401C with a telemetry power of 20dbm (100mW), optimizing range and signal strength.\n \u003c\/li\u003e\n \u003cli\u003e\n  \u003cstrong\u003e\n   Advanced Diversity System:\n  \u003c\/strong\u003e\n  Incorporates true diversity technology to significantly enhance reception and minimize signal dropouts.\n \u003c\/li\u003e\n \u003cli\u003e\n  \u003cstrong\u003e\n   Versatile Connectivity:\n  \u003c\/strong\u003e\n  Supports CRSF protocol and includes dual IPEX MHF-1 antenna connectors, ensuring flexible antenna placement and superior reception.\n \u003c\/li\u003e\n \u003cli\u003e\n  \u003cstrong\u003e\n   Compact and Lightweight:\n  \u003c\/strong\u003e\n  With a PCB size of just 28mm x 16mm and weighing a mere 4 grams with the antenna, it's built for minimal impact on your drone's performance.\n \u003c\/li\u003e\n \u003cli\u003e\n  \u003cstrong\u003e\n   Multiple Firmware Options:\n  \u003c\/strong\u003e\n  Comes preloaded with ExpressLRS 3.3.2 firmware, supporting various configurations and customizations.\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\n \u003cimg alt=\"\" class=\"alignnone size-full wp-image-690864\" height=\"432\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0914\/9972\/5181\/files\/R24-TD_1_3a2c1ed3-6e36-49b9-898a-b50d48ad37f6.jpg?v=1754235084\" width=\"1080\"\u003e\n\u003c\/p\u003e\n\u003ch4\u003e\n Specifications\n\u003c\/h4\u003e\n\u003cul\u003e\n \u003cli\u003e\n  ESP32-PICO-D4, SX1281, ExpressLRS Firmware\n \u003c\/li\u003e\n \u003cli\u003e\n  PA\/LNA: AT2401C\n \u003c\/li\u003e\n \u003cli\u003e\n  RF Frequency: 2.4GHz ISM\n \u003c\/li\u003e\n \u003cli\u003e\n  Telemetry power: 20dbm (100mW)\n \u003c\/li\u003e\n \u003cli\u003e\n  True Diversity\n \u003c\/li\u003e\n \u003cli\u003e\n  Receiver protocol: CRSF\n \u003c\/li\u003e\n \u003cli\u003e\n  Antenna connector: IPEX MHF-1\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n \u003cli\u003e\n  Power supply: 4-13V DC @ \"V\" Pad\n \u003c\/li\u003e\n \u003cli\u003e\n  Power dissipation:  100mA~170mA@5V IN\n \u003c\/li\u003e\n \u003cli\u003e\n  PCB size: 28mm x 16mm\n \u003c\/li\u003e\n \u003cli\u003e\n  Weight: 4g w\/ antenna\n \u003c\/li\u003e\n \u003cli\u003e\n  Packing:\n  \u003cul\u003e\n   \u003cli\u003e\n    1x ELRS-R24-TD\n   \u003c\/li\u003e\n   \u003cli\u003e\n    2x IPEX MHF1 Antennas. 15cm\n   \u003c\/li\u003e\n  \u003c\/ul\u003e\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003e\n RGB LED Status\n\u003c\/h4\u003e\n\u003cul\u003e\n \u003cli\u003e\n  [Rainbow fade effect], Starting Up\n \u003c\/li\u003e\n \u003cli\u003e\n  [Green heartbeat], Web update mode enabled\n \u003c\/li\u003e\n \u003cli\u003e\n  [Slow blink 500ms on\/off ], Waiting for connection from transmitter\n \u003c\/li\u003e\n \u003cli\u003e\n  [Red flashing 100ms on\/off], Radio chip not detected\n \u003c\/li\u003e\n \u003cli\u003e\n  [Orange Double blink then pause], Binding mode enabled\n \u003c\/li\u003e\n \u003cli\u003e\n  [Orange Triple blink then pause], Connected to transmitter but mismatched model-match configuration\n \u003c\/li\u003e\n \u003cli\u003e\n  [Solid single color Connected to a transmitter], color indicates packet rate\n \u003c\/li\u003e\n \u003cli\u003e\n  \u003cstrong\u003e\n   in Boot mode, RGB LED doesn't light up.\n  \u003c\/strong\u003e\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003e\n Firmwares\n\u003c\/h4\u003e\n\u003cul\u003e\n \u003cli\u003e\n  ExpressLRS,  wiki, Click\n  \u003ca href=\"https:\/\/www.expresslrs.org\/\" rel=\"noopener\" target=\"_blank\"\u003e\n   HERE\n  \u003c\/a\u003e\n \u003c\/li\u003e\n \u003cli\u003e\n  Receiver Target:\n  \u003cstrong\u003e\n   Generic ESP32 True Diversity PA 2.4Ghz RX \/or RadioMaster RP4-TD \/or HappyModel EP Dual\n  \u003c\/strong\u003e\n \u003c\/li\u003e\n \u003cli\u003e\n  Any of variants based on Target \"\n  \u003cstrong\u003e\n   Generic ESP32 True Diversity PA 2.4Ghz RX\"\n  \u003c\/strong\u003e\n  can be flashed.\n \u003c\/li\u003e\n \u003cli\u003e\n  Receiver has ExpressLRS 3.3.2 preloaded with binding phrase \"123456\",  the Receiver will never enter binding mode if using the traditional binding procedure.\n \u003c\/li\u003e\n \u003cli\u003e\n  You need to reflash it with your binding phrase OR connect it to your PC\/phone via WiFi and set your binding phrase in WebUI.\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003e\n Tips\n\u003c\/h4\u003e\n\u003cul\u003e\n \u003cli\u003e\n  \u003ca href=\"https:\/\/www.expresslrs.org\/software\/switch-config\/?h=#full-resolution-switch-configuration-modes\" rel=\"noopener\" target=\"_blank\"\u003e\n   Full Resolution Switch Configuration Modes\n  \u003c\/a\u003e\n \u003c\/li\u003e\n \u003cli\u003e\n  \u003cstrong\u003e\n   Powering receiver with Reverse Voltage will damage the regulator chip.\n  \u003c\/strong\u003e\n  DOUBLE CHECK the power wires connected to the receiver.\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4 id=\"flashing-via-wifi\"\u003e\n Flashing via Wifi\n\u003c\/h4\u003e\n\u003cul\u003e\n \u003cli\u003e\n  Power on receiver. RGB LED Rainbow fade effect at first, then Slow blink 500ms on\/off.  after 20s,  Green blink indicating it's on Wifi Hotspot Mode.\n \u003c\/li\u003e\n \u003cli\u003e\n  Wifi SSID \"ExpressLRS RX\",  Password \"expresslrs\"\n \u003c\/li\u003e\n \u003cli\u003e\n  More detailed steps,  pls refer\n  \u003ca href=\"https:\/\/www.expresslrs.org\/software\/updating\/wifi-updating\/?h=wifi\" rel=\"noopener\" target=\"_blank\"\u003e\n   this page\n  \u003c\/a\u003e\n  .\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4 id=\"flashing-via-uart\"\u003e\n Flashing via UART\n\u003c\/h4\u003e\n\u003col\u003e\n \u003cli\u003e\n  Wire the receiver into the USB-TTL adapter, with TX on receiver connected to the Rx on the USB-TTL, and RX on receiver connected to the Tx of the USB-TTL. Wire 5V and GND of the USB-TTL to 5V and GND of the Receiver.\n \u003c\/li\u003e\n \u003cli\u003e\n  Press the boot button while powering on the receiver, then release - the RGB LED will not turn on.\n \u003c\/li\u003e\n \u003cli\u003e\n  In Configurator,  Select the target\n  \u003cstrong\u003e\n   Generic ESP32 True Diversity PA 2.4Ghz RX, or RadioMaster RP4-TD, or HappyModel EP Dual\n  \u003c\/strong\u003e\n  and  \"\n  \u003cstrong\u003e\n   UART\n  \u003c\/strong\u003e\n  \" for Flashing Method,  set your bind phrase and\n  \u003ca href=\"https:\/\/www.expresslrs.org\/2.0\/quick-start\/firmware-options\/\"\u003e\n   Firmware Options\n  \u003c\/a\u003e\n  , Check \"\n  \u003cstrong\u003e\n   erase before flash\n  \u003c\/strong\u003e\n  \" and \"\n  \u003cstrong\u003e\n   Force FLash\n  \u003c\/strong\u003e\n  \".\n \u003c\/li\u003e\n \u003cli\u003e\n  Web-flasher\n  \u003ca href=\"https:\/\/expresslrs.github.io\/web-flasher\/\" rel=\"noopener\" target=\"_blank\"\u003e\n   https:\/\/expresslrs.github.io\/web-flasher\/\n  \u003c\/a\u003e\n \u003c\/li\u003e\n\u003c\/ol\u003e\n","brand":"Unmanned Tech","offers":[{"title":"Default Title","offer_id":54199496376584,"sku":"M-R24-TD","price":19.49,"currency_code":"GBP","in_stock":false}],"url":"https:\/\/bidnamic.store\/products\/matek-r24-td-expresslrs-elrs-2-4ghz-true-diversity-receiver","provider":"Bidnamic Store","version":"1.0","type":"link"}