{"product_id":"seeed-xiao-esp32c3","title":"Seeed XIAO ESP32C3","description":"\u003cp\u003e\n Seeed Studio XIAO ESP32C3 adopts new RISC-V architecture, supporting both Wi-Fi and BLE wireless connectivity. For Internet of Things applications, you will find it is flexible and suitable for all kinds of IoT scenarios.\n\u003c\/p\u003e\n\u003cp\u003e\n We also have a\n \u003ca href=\"https:\/\/old.unmannedtechshop.co.uk\/product\/2-4ghz-linear-antenna-for-xiao-esp32c3\/\"\u003e\n  2.4GHz Rod Antenna for XIAO ESP32C3\n \u003c\/a\u003e\n which increases the wireless capability of the XIAO ESP32C3, The antenna is certified TELEC and XIAO ESP32C3 is compatible with Antenna, Check here to see more!\n\u003c\/p\u003e\n\u003ch2\u003e\n Features\n\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003e\n  Flexible MCU Board: Incorporate the ESP32-C3 32-bit RISC-V chip, operating up to 160 MHz, mounted multiple development ports, supported by Arduino \/ CircuitPython\n \u003c\/li\u003e\n \u003cli\u003e\n  Outstanding RF performance: Implement complete Wi-Fi functions and Bluetooth Low Energy, while supporting communication over 100m with a U.FL antenna\n \u003c\/li\u003e\n \u003cli\u003e\n  Elaborate Power Design: Provide 4 working modes as low as 44 μA in deep sleep mode, while supporting lithium battery charge management\n \u003c\/li\u003e\n \u003cli\u003e\n  Thumb-sized Design: 21 x 17.5mm, Seeed Studio XIAO series classic form factor, suitable for wearable devices\n \u003c\/li\u003e\n \u003cli\u003e\n  Perfect for Production: Breadboard-friendly \u0026amp; SMD design, no components on the back\n \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp class=\"p\"\u003e\n \u003cstrong\u003e\n  Seeed Studio XIAO ESP32C3\n \u003c\/strong\u003e\n has equipped a highly-integrated\n \u003cstrong\u003e\n  ESP32-C3 chip\n \u003c\/strong\u003e\n , built around a 32-bit RISC-V chip processor with a four-stage pipeline that operates at up to 160 MHz.\n\u003c\/p\u003e\n\u003cp class=\"p\"\u003e\n The board equips highly-integrated ESP32-C3 SoC. The chip has been installed with a\n \u003cstrong\u003e\n  complete 2.4GHz Wi-Fi subsystem\n \u003c\/strong\u003e\n which means it supports Station mode, SoftAP mode, SoftAP \u0026amp; Station mode, and promiscuous mode for multiple Wi-Fi applications. It works under an\n \u003cstrong\u003e\n  ultra-low power state\n \u003c\/strong\u003e\n , also supporting features of\n \u003cstrong\u003e\n  Bluetooth 5\n \u003c\/strong\u003e\n and\n \u003cstrong\u003e\n  Bluetooth mesh\n \u003c\/strong\u003e\n . There are 400 KB SRAM \u0026amp; 4 MB Flash on the chip, allowing for more programming space, and bringing more possibilities to the IoT control scenarios.\n\u003c\/p\u003e\n\u003cp class=\"p\"\u003e\n Being a number to the Seeed Studio XIAO family, the board deservedly maintains the classic\n \u003cstrong\u003e\n  thumb-sized form-factor design\n \u003c\/strong\u003e\n and elegant\n \u003cstrong\u003e\n  productization of single-sided components mounting\n \u003c\/strong\u003e\n . Meanwhile, it has equipped with a\n \u003cstrong\u003e\n  battery charge chip\n \u003c\/strong\u003e\n and integrated circuit for enhancing its ability to carry. This board comes included with an external antenna to increase the signal strength for wireless applications. There are 11 digital I\/O that can be used as PWM pins and 4 analog i\/o that can be used as ADC pins. It supports UART, IIC, and SPI serial communication ports, also including IIS (Internet Information Services). Utilizing its small and exquisite hardware design and the powerful onboard chip, programming by Arduino, it will offer more ability to wearable and portable devices or other applications.\n\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\n Specification\n\u003c\/h2\u003e\n\u003ctable border=\"0\" cellpadding=\"0\" cellspacing=\"0\" data-style=\"width: 758px; height: 828px;\"\u003e\n \u003ctbody\u003e\n  \u003ctr\u003e\n   \u003ctd class=\"et2\" height=\"30\" width=\"249\"\u003e\n    \u003cstrong\u003e\n     Parameter\n    \u003c\/strong\u003e\n   \u003c\/td\u003e\n   \u003ctd class=\"et3\" width=\"509\"\u003e\n    \u003cstrong\u003e\n     Description\n    \u003c\/strong\u003e\n   \u003c\/td\u003e\n  \u003c\/tr\u003e\n  \u003ctr\u003e\n   \u003ctd class=\"et2\" height=\"111\" rowspan=\"2\" width=\"249\"\u003e\n    Processor\n   \u003c\/td\u003e\n   \u003ctd class=\"et3\" width=\"509\"\u003e\n    ESP32-C3 SoC\n   \u003c\/td\u003e\n  \u003c\/tr\u003e\n  \u003ctr\u003e\n   \u003ctd class=\"et3\" width=\"509\"\u003e\n    RISC-V single-core 32-bit chip processor with a four-stage pipeline that operates at up to 160 MHz\n   \u003c\/td\u003e\n  \u003c\/tr\u003e\n  \u003ctr\u003e\n   \u003ctd class=\"et2\" height=\"141\" rowspan=\"2\" width=\"249\"\u003e\n    Wireless\n   \u003c\/td\u003e\n   \u003ctd class=\"et3\" width=\"509\"\u003e\n    Complete 2.4GHz Wi-Fi subsystem\n   \u003c\/td\u003e\n  \u003c\/tr\u003e\n  \u003ctr\u003e\n   \u003ctd class=\"et4\" width=\"509\"\u003e\n    Bluetooth 5.0\/ Bluetooth mesh\n   \u003c\/td\u003e\n  \u003c\/tr\u003e\n  \u003ctr\u003e\n   \u003ctd class=\"et2\" height=\"30\" width=\"249\"\u003e\n    On-chip Memory\n   \u003c\/td\u003e\n   \u003ctd class=\"et3\" width=\"509\"\u003e\n    400KB SRAM \u0026amp; 4MB Flash\n   \u003c\/td\u003e\n  \u003c\/tr\u003e\n  \u003ctr\u003e\n   \u003ctd class=\"et2\" height=\"165\" rowspan=\"2\" width=\"249\"\u003e\n    Interface\n   \u003c\/td\u003e\n   \u003ctd class=\"et3\" width=\"509\"\u003e\n    1x UART, 1x IIC, 1x IIS, 1x SPI,\n    \u003cspan class=\"font3\"\u003e\n     11x GPIO(PWM), 4x ADC\n    \u003c\/span\u003e\n   \u003c\/td\u003e\n  \u003c\/tr\u003e\n  \u003ctr\u003e\n   \u003ctd class=\"et3\" width=\"509\"\u003e\n    1x Reset button, 1x Boot button\n   \u003c\/td\u003e\n  \u003c\/tr\u003e\n  \u003ctr\u003e\n   \u003ctd class=\"et2\" height=\"30\" width=\"249\"\u003e\n    Dimensions\n   \u003c\/td\u003e\n   \u003ctd class=\"et3\" width=\"509\"\u003e\n    21 x 17.5mm\n   \u003c\/td\u003e\n  \u003c\/tr\u003e\n  \u003ctr\u003e\n   \u003ctd class=\"et2\" height=\"171\" rowspan=\"3\" width=\"249\"\u003e\n    Power\n   \u003c\/td\u003e\n   \u003ctd class=\"et3\" width=\"509\"\u003e\n    Circuit operating voltage: 3.3V@200mA\n   \u003c\/td\u003e\n  \u003c\/tr\u003e\n  \u003ctr\u003e\n   \u003ctd class=\"et3\" width=\"509\"\u003e\n    Charging current: 50mA\/100mA\n   \u003c\/td\u003e\n  \u003c\/tr\u003e\n  \u003ctr\u003e\n   \u003ctd class=\"et3\" width=\"509\"\u003e\n    Input voltage (VIN): 5V\n   \u003c\/td\u003e\n  \u003c\/tr\u003e\n  \u003ctr\u003e\n   \u003ctd class=\"et4\" width=\"509\"\u003e\n    Deep Sleep Power Consumption\n   \u003c\/td\u003e\n   \u003ctd class=\"et4\" width=\"509\"\u003e\n    Deep Sleep Model: \u0026gt;44 μA\n   \u003c\/td\u003e\n  \u003c\/tr\u003e\n  \u003ctr\u003e\n   \u003ctd class=\"et5\" height=\"90\" rowspan=\"3\" width=\"249\"\u003e\n    Wi-Fi Enabled Power Consumption\n   \u003c\/td\u003e\n   \u003ctd class=\"et4\" width=\"509\"\u003e\n    Active Model: \u0026lt;75 mA\n   \u003c\/td\u003e\n  \u003c\/tr\u003e\n  \u003ctr\u003e\n   \u003ctd class=\"et4\" width=\"509\"\u003e\n    Modem-sleep Model: \u0026lt;25 mA\n   \u003c\/td\u003e\n  \u003c\/tr\u003e\n  \u003ctr\u003e\n   \u003ctd class=\"et4\" width=\"509\"\u003e\n    Light-sleep Model: \u0026lt;4 mA\n   \u003c\/td\u003e\n  \u003c\/tr\u003e\n  \u003ctr\u003e\n   \u003ctd class=\"et5\" height=\"60\" rowspan=\"2\" width=\"249\"\u003e\n    BLE Enabled Power Consumption\n   \u003c\/td\u003e\n   \u003ctd class=\"et4\" width=\"509\"\u003e\n    Modem-sleep Model: \u0026lt;27 mA\n   \u003c\/td\u003e\n  \u003c\/tr\u003e\n  \u003ctr\u003e\n   \u003ctd class=\"et4\" width=\"509\"\u003e\n    Light-sleep Model: \u0026lt;10 mA\n   \u003c\/td\u003e\n  \u003c\/tr\u003e\n \u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2 dir=\"ltr\"\u003e\n Comparison between Seeeduino XIAO and XIAO RP2040\n\u003c\/h2\u003e\n\u003cdiv align=\"left\" dir=\"ltr\"\u003e\n \u003ctable\u003e\n  \u003ccolgroup\u003e\n   \u003ccol width=\"100\"\u003e\n   \u003ccol width=\"206\"\u003e\n   \u003ccol width=\"245\"\u003e\n  \u003c\/colgroup\u003e\n  \u003ctbody\u003e\n   \u003ctr\u003e\n    \u003ctd\u003e\n     \u003cp dir=\"ltr\"\u003e\n      Item\n     \u003c\/p\u003e\n    \u003c\/td\u003e\n    \u003ctd\u003e\n     \u003cp dir=\"ltr\"\u003e\n      XIAO RP2040\n     \u003c\/p\u003e\n    \u003c\/td\u003e\n    \u003ctd\u003e\n     \u003cp dir=\"ltr\"\u003e\n      Seeeduino XIAO\n     \u003c\/p\u003e\n    \u003c\/td\u003e\n   \u003c\/tr\u003e\n   \u003ctr\u003e\n    \u003ctd\u003e\n     \u003cp dir=\"ltr\"\u003e\n      Processor\n     \u003c\/p\u003e\n    \u003c\/td\u003e\n    \u003ctd\u003e\n     \u003cp dir=\"ltr\"\u003e\n      Dual-core ARM® Cortex® M0+ @133MHz\n     \u003c\/p\u003e\n    \u003c\/td\u003e\n    \u003ctd\u003e\n     \u003cp dir=\"ltr\"\u003e\n      ARM® Cortex®-M0+ @48MHz\n     \u003c\/p\u003e\n    \u003c\/td\u003e\n   \u003c\/tr\u003e\n   \u003ctr\u003e\n    \u003ctd\u003e\n     \u003cp dir=\"ltr\"\u003e\n      Flash\n     \u003c\/p\u003e\n    \u003c\/td\u003e\n    \u003ctd\u003e\n     \u003cp dir=\"ltr\"\u003e\n      2MB\n     \u003c\/p\u003e\n    \u003c\/td\u003e\n    \u003ctd\u003e\n     \u003cp dir=\"ltr\"\u003e\n      256KB\n     \u003c\/p\u003e\n    \u003c\/td\u003e\n   \u003c\/tr\u003e\n   \u003ctr\u003e\n    \u003ctd\u003e\n     \u003cp dir=\"ltr\"\u003e\n      Onboard Button\n     \u003c\/p\u003e\n    \u003c\/td\u003e\n    \u003ctd\u003e\n     \u003cp dir=\"ltr\"\u003e\n      Reset Button\/ Boot Button\n     \u003c\/p\u003e\n    \u003c\/td\u003e\n    \u003ctd\u003e\n     \u003cp dir=\"ltr\"\u003e\n      No Button(reset pad)\n     \u003c\/p\u003e\n    \u003c\/td\u003e\n   \u003c\/tr\u003e\n   \u003ctr\u003e\n    \u003ctd\u003e\n     \u003cp dir=\"ltr\"\u003e\n      RGB LED\n     \u003c\/p\u003e\n    \u003c\/td\u003e\n    \u003ctd\u003e\n     \u003cp dir=\"ltr\"\u003e\n      Full Color RGB LED\n     \u003c\/p\u003e\n    \u003c\/td\u003e\n    \u003ctd\u003e\n     \u003cp dir=\"ltr\"\u003e\n      None\n     \u003c\/p\u003e\n    \u003c\/td\u003e\n   \u003c\/tr\u003e\n   \u003ctr\u003e\n    \u003ctd\u003e\n     \u003cp dir=\"ltr\"\u003e\n      Analog Pin\n     \u003c\/p\u003e\n    \u003c\/td\u003e\n    \u003ctd\u003e\n     \u003cp dir=\"ltr\"\u003e\n      4\n     \u003c\/p\u003e\n    \u003c\/td\u003e\n    \u003ctd\u003e\n     \u003cp dir=\"ltr\"\u003e\n      11\n     \u003c\/p\u003e\n    \u003c\/td\u003e\n   \u003c\/tr\u003e\n   \u003ctr\u003e\n    \u003ctd\u003e\n     \u003cp dir=\"ltr\"\u003e\n      PWM Pin\n     \u003c\/p\u003e\n    \u003c\/td\u003e\n    \u003ctd\u003e\n     \u003cp dir=\"ltr\"\u003e\n      11\n     \u003c\/p\u003e\n    \u003c\/td\u003e\n    \u003ctd\u003e\n     \u003cp dir=\"ltr\"\u003e\n      10\n     \u003c\/p\u003e\n    \u003c\/td\u003e\n   \u003c\/tr\u003e\n   \u003ctr\u003e\n    \u003ctd\u003e\n     \u003cp dir=\"ltr\"\u003e\n      DAC Output\n     \u003c\/p\u003e\n    \u003c\/td\u003e\n    \u003ctd\u003e\n     \u003cp dir=\"ltr\"\u003e\n      None\n     \u003c\/p\u003e\n    \u003c\/td\u003e\n    \u003ctd\u003e\n     \u003cp dir=\"ltr\"\u003e\n      1\n     \u003c\/p\u003e\n    \u003c\/td\u003e\n   \u003c\/tr\u003e\n   \u003ctr\u003e\n    \u003ctd\u003e\n     \u003cp dir=\"ltr\"\u003e\n      Programming language\n     \u003c\/p\u003e\n    \u003c\/td\u003e\n    \u003ctd\u003e\n     \u003cp dir=\"ltr\"\u003e\n      Arduino\n     \u003c\/p\u003e\n     \u003cp dir=\"ltr\"\u003e\n      MicroPython\n     \u003c\/p\u003e\n     \u003cp dir=\"ltr\"\u003e\n      CircuitPython\n     \u003c\/p\u003e\n    \u003c\/td\u003e\n    \u003ctd\u003e\n     \u003cp dir=\"ltr\"\u003e\n      Arduino\n     \u003c\/p\u003e\n    \u003c\/td\u003e\n   \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n \u003c\/table\u003e\n\u003c\/div\u003e\n","brand":"Unmanned Tech","offers":[{"title":"Default Title","offer_id":54201738363144,"sku":"113991054","price":4.79,"currency_code":"GBP","in_stock":false}],"url":"https:\/\/bidnamic.store\/products\/seeed-xiao-esp32c3","provider":"Bidnamic Store","version":"1.0","type":"link"}