3F UL Gear Lanshan 1 Pro / 3 Season / Khaki

FEATURES

Updated from Lanshan 1, dedicated to all kinds of complex and the most demanding terrains and wilderness.

This solid single wall tent built for any ultralight trail missions where every ounce of weight and inch of space count.

Requires 1 trekking poles or 3F UL GEAR T1 Z-Pole(120cm) for set up - sold separately.

Tent body is super tear resistance SilNylon - cannot be destroyed by storms, no case for now - with 2000mm waterproof.

1 door, 1 vestibule and 1 side triangular inner space for gear storage.

Incredibly low all-in weight of just 840g/1.85lb.

Structure: 1 Layer wall Pyramid tent

Tie point: 8 stake, 3 reinforcement guy-line point, 1 top hanging point

Seams: Needs Seam seal by silicone glue

Zipper&Buckle: YKK, Duraflex

Fabric weight: 38g(m²) 1.15oz(yr²)

Ultralight tent body: 690g

Fabric tear resistance: 40-45NSuper strong reinforcement: UHMWPE patch

SPECS

FLY MATERIALS

20D super tear resistant SilNylon

INNER MATERIALS

15D Nylon(4-season) 20D Nylon Mesh(3-season)

BATH TUBE FLOOR MATERIALS

20D PU Nylon with waterproof 6000mm

BATH TUBE FLOOR HEIGHT

11cm / 4.33"

WEIGHT

690g / 1.52 lb (only tent)

ACC WEIGHT

Stakes+sack-100g, Guyline-11g, Footprint-100g, copression sack-36g

TRAIL WEIGHT

840g / 1.85 lb

DIMENSION

270*110*125cm / 8'10"(L)*3'7"(W)*4'1"(H)

CAPACITY

1 Person

PACKED DIMENSION34cm*15cm / 13.4"*5.9"

DIMENSIONS

WHY GO SILNYLON?

Silnylon cannot be factory taped like PU Nylon due to its physical properties, it requires you to seal it outdoors with silicone. Why would we use this fabric with seemingly obvious flaws in the more advanced Lanshan PRO?
It was a decision we made in terms of fabric aging time, tear strength. We think the places that professional hikers reached will be harsher and have stronger UV rays, which puts higher demands on the aging and strength of the fabric.

The aging performance of Silicon-PU Nylon in this data is based on our years of repairing tents in the Chinese market, including PU Nylon of brands such as MSRBigAgnes3FULGEAR, etc.

Since we haven’t repaired the aging SilNylon tent, the aging performance of SilNylon is based on feedback from our customers and users of backpackinglight.com

This data is derived from our experiment on one-way tearing of single-ply fabrics with incisions.

SilNylon will not be torn apart like paper under the force that exceeds its tearing strength. The slippy fibers will go together and lines up into a strong anti-tear force, and although the tent is damaged at this point, it will not collapse and can continue to provide protection for the user.

This data is derived from our test using the WX Air PowerPressure device, tested at 25 degrees Celsius. The video of the experiment is published on our Youtube channel.

The water proof that can effectively prevent raindrops piercing through is 1000-2000mm, which is why we try our best to make SilNylon to this value. The water resistance pressure of PU Nylon is far beyond the actual use requirement because we found in our study that only by increasing the thickness of PU layer to this value, it is possible for PU tent to reach 5 years of life.

PACKING LIST

SETUP INSTRUCTION