• Happymodel Mobula6 BNF Brushless Whoop - Image 1
  • Happymodel Mobula6 BNF Brushless Whoop - Image 2
  • Happymodel Mobula6 BNF Brushless Whoop - Image 3
  • Happymodel Mobula6 BNF Brushless Whoop - Image 4
  • Happymodel Mobula6 BNF Brushless Whoop - Image 5
  • Happymodel Mobula6 BNF Brushless Whoop - Image 6
  • Happymodel Mobula6 BNF Brushless Whoop - Image 7
1 7

Happymodel Mobula6 BNF Brushless Whoop

Happymodel Mobula6 BNF Brushless Whoop

£74.95
£0.00 £74.95
Sale Sold out
Receiver
KV Rating

PLEASE NOTE: It is possible for the Mobula6 to lose bind and betaflight config if the battery is allowed to run too low - however this can be easily resolved to get back in the air again. Please see here for more info.

This is a 65mm brushless whoop from happymodel that weighs in at just 20g. It features the crazybee F4 Lite flight controller (4x5A ESC) that includes either a built in FRsky or Flysky receiver. The camera is the runcam nano 3, which is one of the best tiny FPV cameras you can get at this price point. If you are looking for alot of fun in a tiny package this is the brushless whoop for you.

Key Features

  • Crazybee F4 Lite Flight Controller with MPU6000 (1S lipo support)
  • The lightest tiny whoop at 20g
  • Strong injection moulded canopy
  • Runcam Nano 3 FPV camera
  • Includes batteries and charger

Specification

  • Brand Name: Happymodel
  • Model: Mobula6
  • Item Name: 65mm Crazybee F4 Lite 1S Brushless Whoop FPV Racing Drone BNF
  • Optional Version: Frsky Receiver ( Compatible with ACCST D8/D16, Recommend D8 mode)
    Flysky Receiver ( Compatible with AFHDS and AFHDS-2A Flysky transmitter)
  • Drone Wheelbase: 65mm
  • Size: 80x80x37mm
  • Weight: 20g

Detailed Component Specifications

Crazyb
Crazybee F4 LiteFlight Controller
Built-in ESC & Receiver & VTX
Frsky SPI RX version) CRAZYBEE F4 Lite Frsky version Firmware target: CrazybeeF4FR
(Flysky SPI RX version) CRAZYBEE F4 Lite Flysky version Firmware target: CrazybeeF4FS
MCU:STM32F411CEU6 (100MHZ, 512K FLASH)
Sensor: MPU-6000(SPI connection)
Board size: 28.5 * 28.5MM
Power supply: 1S battery input (DC 2.9V-4.35V)
Built-in 5A(each) Blheli_S 4in1 ESC Dshot600 ready
Built-in Betaflight OSD(SPI Control)
Built-in 5.8G VTX
Built-in SPI Frsky/Flysky receiver
Built-in 5V 1A BEC
Built-in voltage detection
Onboard Frsky Receiver Version
SPI BUS receiver Frsky D8 compatible
Compatible Non EU transmitter D8 model
Channels: 8ch
Failsafe support
No ground interference ( Transmitter and receiver 1 m from the ground): 100m~200m
Onboard Flysky Receiver Version
SPI BUS receiver
Protocol: AFHDS and AFHDS-2A Switchable
Channels: 8ch(AFHDS) or 14ch(AFHDS-2A)
No ground interference ( Transmitter and receiver 1 m from the ground): 100~200m
Failsafe support
Onboard 5A BLheli_S 4in1 ESC
MCU upgraded to EFM8BB21
Power supply: 1S LiPo/LiPo HV
Current: 5A continuous peak 6A (3 seconds)
Support BLHeliSuite programmable
Factory firmware: O_H_5_REV16_7.HEX
Default protocol: DSHOT600
SE0802 19000KV / 25000KV Motor
Model: SE0802
KV: 19000KV / 25000KV Motor
Configu-ration:9N12P
Stator Diamter:8mm
Stator Length:2mm
Shaft Diameter:Φ1mm
Motor Dimension(Dia.*Len):Φ10.5mm*14.9mm
Weight(g):1.9g
No.of Cells(Lipo):1S only
Gemfan 1219 3-Blade Propeller Brand Name: Gemfan
Center Thickness:5mm
Prop Disk Diameter:31mm
Center Hole Inner diameter:1.0mm
Quantity: 4 CW & 4 CCW
Weight:0.28g
Onboard 5.8G 40CH 25mW VTX Output power: 25mw
Frequency: 40CH
Input voltage: 3.3V 5.5V
Current consumption: 300mA(type)
Frequency: 5.8GHz 5bands 40 channels
With Race band
Smartaudio ready
Runcam Nano 3 FPV Camera Brand Name: Runcam
Model: Nano 3
Item Name: 1/3 CMOS 800TVL Camera
Electronic Shutter Speed: Auto
Auto Gain Control (AGC): Auto
Min. Illumination: 0.01Lux@1.2F
D-WDR: Auto
Day/Night: Color
Power:DC 3-5.5V
Current: 110mA@5V 120mA@3.3V
Housing Material: ABS
Net Weight: 1.2g
Dimensions: L14mm*W14mm*H9mm
Lipo Battery ( Included)
Continuous Discharge Rate: 30C
Size: 57mmx12mmx7mm
Weight: 8g
Connector: PH2.0
Quantity: 4 PCS

Included

  • 1x Mobula6 1S FPV Racing Drone
    4x 1S 300mAh 30C Lipo Battery
    1x 1S Lipo/LIHV USB Charger
    1x Propeller disassemble Tool

U

Unmanned Tech

Verified Seller on Bidnamic Store
View all products by Unmanned Tech

Free Shipping

Shipping Overview:

  • Daily Cut-Off: Orders placed before 16:00 GMT are prepared the same working day
  • Preparation Time: 0–1 working days (Monday to Friday)
  • Delivery Window: 5–10 working days after dispatch (Monday to Friday)
  • UK Delivery: Free shipping is provided on all orders within the United Kingdom

For more information, click here

30-Days Return

Essential Details:

  • Return Window: 30 days from the date of delivery
  • Restocking Fees: None
  • Refund Timeline: Usually within 7 business days
  • Return Shipping: Customers cover the cost of sending items back

For more information, click here

View full details