• Happymodel Mobula7 1S ELRS 75mm BNF Brushless Whoop (2.4Ghz) - Image 1
  • Happymodel Mobula7 1S ELRS 75mm BNF Brushless Whoop (2.4Ghz) - Image 2
  • Happymodel Mobula7 1S ELRS 75mm BNF Brushless Whoop (2.4Ghz) - Image 3
  • Happymodel Mobula7 1S ELRS 75mm BNF Brushless Whoop (2.4Ghz) - Image 4
  • Happymodel Mobula7 1S ELRS 75mm BNF Brushless Whoop (2.4Ghz) - Image 5
  • Happymodel Mobula7 1S ELRS 75mm BNF Brushless Whoop (2.4Ghz) - Image 6
  • Happymodel Mobula7 1S ELRS 75mm BNF Brushless Whoop (2.4Ghz) - Image 7
1 7

Happymodel Mobula7 1S ELRS 75mm BNF Brushless Whoop (2.4Ghz)

Happymodel Mobula7 1S ELRS 75mm BNF Brushless Whoop (2.4Ghz)

£92.24 GBP
£92.24 GBP
Sale Sold out
Shipping calculated at checkout.

This drone features the all new 5in1 AIO board that includes 2.4Ghz ExpressLRS V2.0, OpenVTX (up to 400mW) along with 4x 12A BLheli_S ESC, and BetaFlight OSD all built into a F4 whoop flight controller board.

The new RS0802 motors come with a new unibell design, and use a 1.5mm shaft with a PCB bottom plate, high efficiency and much more reliable.

&feature=emb_title

Key Features

  • X12 5-IN-1 AIO flight controller built-in 2.4G ELRS V3.0 and Openvtx
  • VTX Power up to 400mw
  • ELRS V3.0 Support
  • NEW RS0802 KV20000 motors
  • Runcam Nano3 The lightest 1/3 CMOS 800TVL Camera
  • Smooth and powerful
  • Compatible for 1S Lipo/LIHV
  • Recommend 1S 450mah/550mah/650mah battery(Not include)

 

&feature=emb_title

Specification

  • Brand Name: Happymodel
  • Item Name: Mobula7 1S 75mm Micro FPV whoop drone
  • Wheelbase: 75mm
  • Size: 99mm*99mm*40mm
  • Weight: 24g
Motor Mode: RS0802 KV20000
Configu-ration:9N12P
Stator Diamter:8mm
Stator Length:2mm
Shaft Diameter:Φ1.5mm
Motor Dimension(Dia.*Len):Φ10.5mm*13.5mm
Weight(g):2.0g
No.of Cells(Lipo):1S only
Propellers Weight:0.24g
Material:PC
Pitch:1 inch
Props Dia:40mm
Center Thickness:5mm
Center Hole Dia:1.5mm
Flight controller X12 ELRS V1.0 flight controller built-in ELRS 2.4G receiver Target: CRAZYBEEF4SX1280
X12 Frsky V1.0 flight controller built-in SPI Frsky 2.4G receiver Target: CRAZYBEEF4FR
X12 Flysky V1.0 flight controller built-in SPI Flysky 2.4G receiver Target: CRAZYBEEF4FS
X12 PNP V1.0 flight controller without onboard receiver Target: CRAZYBEEF4DX
MCU:STM32F411CEU6 (100MHZ, 512K FLASH)
Sensor: MPU6000 or ICM20689(SPI connection)
Mount hole size: 25.5mm*25.5mm
Power supply: 1S battery input (DC 2.9V-4.35V)
Built-in 12A(each) Blheli_S 4in1 ESC
Built-in Betaflight OSD(SPI Control)
Built-in 5.8G OpenVTX 0mw~400mw
Built-in ExpressLRS 2.4G,Frsky D8/D16,Flysky AFHDS 2A
Built-in voltage detection
Built-in current sensor
Onboard 4in1 ESC Power supply: 1S LiPo/LiPo HV
Current: 12A continuous peak 15A (3 seconds)
Support BLHeliSuite programmable
Factory firmware: Z_H_30_REV16_7.HEX
Default protocol: DSHOT300
Support Bluejay firmware
Onboard SPI ExpressLRS 2.4GHz Receiver

( 2.4G ELRS Receiver Version)

 Packet Rate option: 50Hz/150Hz/250Hz/500Hz
ExpressLRS Firmware version: V3.0
RF Frequency: 2.4GHz
Antenna: SMD antenna
Telemetry output Power: <12dBm
Receiver protocol: SPI ExpressLRS
Compatible with ExpressLRS V2.0 TX Module
Couldn't flash separately ExpressLRS firmware
Onboard Frsky SPI D8/D16 receiver compatible

( Compatible Frsky Receiver Version)

 SPI BUS receiver Frsky D8 compatible
Compatible Non-EU transmitter D8 model
Channels: 8ch
No ground interference ( Transmitter and receiver 1 m from the ground): 200meter
Failsafe support
Onboard Flysky SPI receiver compatible

( Compatible Flysky Receiver Version)

 SPI BUS receiver
Protocol: AFHDS and AFHDS-2A Switchable
Channels: 8ch(AFHDS) or 14ch(AFHDS-2A)
No ground interference ( Transmitter and receiver 1 m from the ground): 200meter
Failsafe support
PNP Version (without onboard receiver) Full UART1 for external Receiver
Support CRSF/GHOST/SBUS/IBUS/DSMX protocol
IR1 pad(invert RX1) used for SBUS input
Onboard 5.8g OPENVTX Firmware version: OPENVTX
Smart audio v2.1
PIT Mode support
RCE Mode support
Channels:48ch
Transmitting Power: 0/RCE/25mw/100mw/400mw
Power supply: DC 5V
Current (5v): <650ma (400mw)
Runcam Nano3 Model: RunCam Nano 3
Image Sensor: 1/3" CMOS
Horizontal Resolution: 800TVL
Lens : 2.1mm(M8) FOV 150°
Signal System: NTSC
S/N Ratio: >50dB
Electronic Shutter Speed: Auto
Auto Gain Control (AGC): Auto
Min. Illumination: 0.01Lux@1.2F
D-WDR: Auto
Day/Night: Color
Power:DC 3-5.5V
Current: 110mA@5V 120mA@3.3V
Housing Material: ABS
Net Weight: 1.2g
Dimensions: L14mm*W14mm*H9mm
Recommend 1S Lipo Battery (Not included)

Capacity: 650mAh
Voltage: 3.8v
Continuous Discharge Rate: 30C
Instantaneous discharge rate: 60C
Size: 60mmx18mmx8mm
Weight: 16g
Connector: PH2.0

Included

  • 1x Mobula7 1S FPV Racing Drone
  • 1x Propeller disassemble Tool
  • 1x Extra Canopy
  • 1x Parallel charging board
U

Unmanned Tech

Verified Seller on Bidnamic Store
View all products by Unmanned Tech

Free Shipping

Shipping Overview:

  • Daily Cut-Off: Orders placed before 16:00 GMT are prepared the same working day
  • Preparation Time: 0–2 working days (Monday to Friday)
  • Delivery Window: 5–9 working days after dispatch (Monday to Friday)
  • UK Delivery: Free shipping is provided on all orders within the United Kingdom

For more information, click here

30-Days Return

Essential Details:

  • Return Window: 30 days from the date of delivery
  • Restocking Fees: None
  • Refund Timeline: Usually within 7 business days
  • Return Shipping: Customers cover the cost of sending items back

For more information, click here

View full details