REVODATA 10G 90W PoE Injector, Convert Non-PoE to PoE++ Adapter, IEEE802.3af/at/bt Standard, 1/2.5/5/10Gbps Network via RJ45, Up to 100M Distance,

OVERVIEW:
The PSE90BT-10G is a 1/2.5/5/10Gbps Power over Ethernet Injector with one Ethernet Input (data only) port and one Output (data + power) port that is designed for small or medium network environments. The PSE90BT-10G supplies remote power for new applications such as wireless access points, pan-tilt-zoom (PTZ) IP cameras and videophones.

It complies with IEEE 802.3bt PoE standard. It can work with 10/100Base-T networking devices and emerging 1000Base-T devices such as Wi-MAX and wireless IEEE 802.11n access points. By adding a PoE Splitter to existing non-PoE networking equipment, installing networking products such as Access Points and IP cameras can easily be performed. Wireless device deployments are easily located without the need for power outlets and network administrators don’t need to use AC power adapters anymore. For all the function featured in PSE90BT-10G, people can get the benefit of flexible network installation at lower cost, less downtime.

Model: PSE90BT-10G
Technical Specifications Standards Compliance：
IEEE 802.3 10Base-T Ethernet
IEEE 802.3u 100Base-Tx Fast Ethernet
IEEE 802.3af/at/bt Power over Ethernet
Connector: RJ-45 1/2.5/5/10Gbps

Pin Assignment and Polarity: 1/2 (+), 3/6 (-);4/5 (+), 7/8 (-)
Output Power Voltage: 54-57 VDC
Power: Mode-A+Mode-B 90 Watts Max.
Input Power AC Input Voltage: 100~240VAC
Requirements AC Input Current: ≤1.5A @ 100~240 VAC

Indicators
AC Power (Green)
PoE (Orange)

Environmental Conditions
Operating Temperature: -20 ~55°C
Storage Temperature: -25 ~ 70°C
Storage Humidity: Maximum 95%, Non-condensing

Dimensions (L x W x H): 172mm x 76mm x 44mm (6.77in x 2.99in x 1.73in)
Weight: 0.63kg (1.39lbs)

Package Content:
1 x PSE90BT-10G POE Injector
1 x Power Cable