Wio Terminal LoRaWAN Field Tester Kit
Wio Terminal LoRaWAN Field Tester Kit
Couldn't load pickup availability
&feature=emb_title
Features
- Ready to go Wio Terminal LoRaWAN Field Tester. No setup, just power it on! The included communication allows a normal use for 3 to 5 years.
- Compact size, support Type C power bank charge to bring the device everywhere.
- Monitor the LongFi network performance from the field to verify the coverage and know the different Gateways / Hotspots covering a given place.
- Find the best places to deploy new Gateways / Hotspots.
- Directly display network and GPS information on the Wio Terminal screen
Applications
The WioLoRaWanFieldTester provides different features, all-in-one:
-
Field Tester - it allows to monitor the LoRaWan / LongFi network performance from the field. That way you can verify the coverage and know the different Gateways / Hotspots covering a given place. It helps to find the best places to deploy new Gateways / Hotspots, compare different places to optimize the network deployment. It can show signal strength in real-time and allows the testing of different network parameters.
-
Mapper - it automatically transfers the positions to the network mappers - Helium Mappers and Coverage Map - to create a map of coverage. This map is important to understand where it is possible to use the network. It is a key point for giving trust to the network and motivating the service providers to use it.
-
Tracker - it can be connected to tracking services like cargo to track cars, people, assets in real-time.
-
Multi-zone: supports EU868, AS923, US915, KR920, IN865, AU915
-
Friendly to developers: compatible with over 300 Plug and Play Grove modules to create IoT nodes. The firmware is open-source and can be upgraded like moving a file to a directory.
Principles
When Wio Terminal is connecting to the network, it starts sending messages on regular basis, meanwhile, the onboarded GPS is getting the device's position in real-time. This message is acknowledged by the network to retrieve the information requested for field testing. Each of the messages is processed by a dedicated application computing advanced Field Testing information later transmitted back to the device. When the GPS signal quality is correct, the location is transferred to the mappers and tracking services.
All the Field Testing information is displayed on the Wio Terminal screen where you can also set up different radio parameters.
Learn more: How WioLoRaWanFieldTester works.
Documentation
- GitHub: Wio LoRaWan Field tester by disk91
- Setup documentation
- Developer guide
- LoRa-E5 datasheet and specifications
- LoRa-E5 AT Command Specification
- STM32WLE5JC Datasheet
- Quectel L76-LB GNSS datasheet
Specifications
Wio Terminal
|
Main Chip |
Manufacturer Part Number |
ATSAMD51P19 |
|
Core Processor |
ARM® Cortex®-M4F running at 120MHz |
|
|
Memory |
4 MB External Flash, 192 KB RAM |
|
|
Maximum Speed |
200MHz |
|
|
External Flash |
4MBytes |
|
|
Operating Temperature |
-40°C ~ 85°C (TA) |
|
|
LCD Screen |
Resolution |
320x240 |
|
Display Size |
2.4inch |
|
|
Drive IC |
ILI9341 |
|
|
Wireless Connectivity |
Manufacturer Part Number |
RTL8720DN |
|
KM4 CPU |
ARM® Cortex®-M4F @ 200MHz |
|
|
KM0 CPU |
ARM® Cortex®-M0 |
|
|
Wi-Fi |
802.11 a/b/g/n 1x1, Dual Band 2.4GHz & 5GHz |
|
|
Bluetooth |
Support BLE5.0 |
|
|
Built-in Modules |
Accelerometer |
LIS3DHTR |
|
Microphone |
1.0V-10V -42dB |
|
|
Speaker |
≥78dB @10cm 4000Hz |
|
|
Light Sensor |
400-1050nm |
|
|
Infrared Emitter |
940nm |
|
|
Interface |
MicroSD Card Slot |
Maximum 16GB |
|
GPIO |
40-PIN (Raspberry Pi Compatible) |
|
|
Supported Protocol |
SPI, I2C, I2S, ADC, DAC, PWM, UART(Serial) |
|
|
Grove |
2 (Multifunction), for Digital, Analog, I2C, and PWM |
|
|
FPC |
20-Pins |
|
|
USB Type-C |
Power & USB-OTG |
|
|
Operation Interface |
5-Way Switch |
|
|
Power/Reset Switch |
||
|
User-defined button *3 |
||
|
Enclosure |
Mouting |
Built-in magnets and two mounting holes |
|
Dimension |
72mm*57mm*12mm |
|
|
Materials |
ABS+PC |
|
|
Software Support |
Arduino |
|
|
MicroPython |
||
|
AT Firmware |
||
|
Visual Studio Code |
||
Wio Terminal LoRaWan Chassis with Antenna
|
Parameters |
Specifications |
|
|
Voltage - supply |
3V3 |
|
|
LoRa-E5 |
Frequency |
EU868 / US915 / AU915 / AS923 / KR920 / IN865 |
|
Protocol |
LoRaWAN |
|
|
Sensitivity |
-116.5dBm ~ -136dBm |
|
|
modulation |
LoRa, (G)FSK, (G)MSK, BPSK |
|
|
Quectel L76-LB |
Receiving Bands |
GPS L1/Galileo E1 C/A: 1575.42MHz GLONASS L1 C/A: 1602.5625MHz BeiDou B1 C/A: 1561.098MHz |
|
Channel |
33 Tracking Channels 99 Acquisition Channels 210 PRN Channels |
|
|
Sensitivity |
Acquisition: -148dBm Tracking: -165dBm Reacquisition: -160dBm |
|
|
Interfaces |
Wio Terminal 40-PIN(2x20 Male Headers) |
|
|
Enclosure |
Dimension |
72mm*57mm*12mm |
|
Materials |
3D Printing with ABS |
|
Included
- 1x Wio Terminal
- 1x USB Type-C Short Cable
- 1x Wio Terminal Chassis - LoRa-E5 and GNSS *1
- 1x Antenna(EU868/US915) *1
Unmanned Tech
Verified Seller on Bidnamic Store
Free Shipping
Free Shipping
Shipping Overview:
- Daily Cut-Off: Orders placed before 16:00 GMT are prepared the same working day
- Preparation Time: 0–1 working days (Monday to Friday)
- Delivery Window: 5–10 working days after dispatch (Monday to Friday)
- UK Delivery: Free shipping is provided on all orders within the United Kingdom
For more information, click here
30-Days Return
30-Days Return
Essential Details:
- Return Window: 30 days from the date of delivery
- Restocking Fees: None
- Refund Timeline: Usually within 7 business days
- Return Shipping: Customers cover the cost of sending items back
For more information, click here
